|product name:||Portable sulfuryl fluoride gas detector|
|Measurement object:||Sulfuryl fluoride in the air|
Brief introduction of portable sulfuryl fluoride gas detector:
The portable sulfuryl fluoride gas detector is equipped with a small gas pump. The working mode is that the power supply drives the gas pump to sample the gas in the area to be measured, and then sends the sample gas to the instrument for testing. The sulfuryl fluoride detector is characterized by fast detection speed, long-distance measurement of hazardous areas, and maintenance personnel safety. Others are the same as diffusion gas detectors. As the name implies, the diffusion type gas detector is to slowly detect the gas in the area to be tested with the free flow of air. This method is affected by the detection environment, such as ambient temperature and wind speed. The diffusion gas detector is characterized by low cost. The working principle of the sulfuryl fluoride detector is basically the same as that of the diffused gas detector. The sample gas is detected by the sensor of the instrument and then converted into a corresponding value and displayed on the screen through the circuit amplification.
Product details and some materials may not be comprehensive. If you need more detailed information about this product or request related materials, please feel free to contact the official online customer service! We will provide professional services and give sincere offers!
Main features of portable sulfuryl fluoride gas detector:
Visual alarm: low-concentration yellow display and high-concentration red display, the interface is clear and eye-catching.
USB communication: 9600-byte high-speed USB communication port for smooth communication directly with the computer.
Audio alarm: dual frequency leakage alarm, high and low leakage settings, to ensure the safety of staff life.
Display mode: Equipped with a full-color 3.5 TFT TFT screen, which can display both numerical display and graphics at the same time, making the test intuitive.
Test record: The instrument uses a high-capacity FLASH memory chip, which can store measurement data for one month. The computer and instrument can be viewed at both ends, which is more intimate.
Technical parameters of portable sulfuryl fluoride gas detector:
Detection range: 0-10, 500, 40000ppm, etc. (can be customized range, please consult the official website customer service for details)
Resolution: 0.01ppm (depending on range and sensor)
Display mode: LCD display
Detection method: Diffusion, optional
Transmission method: USB communication
Detection accuracy: ≤ ± 1% (FS)
Operating environment: temperature -20 ℃ ~ +70 ℃; relative temperature ≤ 95% RH (non-condensing)
Size and weight: 228 * 80 * 50mm; 500g
Note for portable sulfuryl fluoride gas detector:
To prevent ignition of flammable gases, do not charge the battery in a hazardous environment.
When using the instrument for the first time, it must be fully charged and charged with a special charger.
The operating temperature of this instrument is -20-70 ° C, but due to different sensor types, the operating temperature range may be reduced.
Please perform a performance test on the instrument before use. If the performance test fails together, you can re-calibrate or restore the factory calibration.
The sensor vent must be kept clean. Blockage of the sensor vent or dirt from the waterproof mesh may cause readings to be lower than actual leaks.
The lithium battery used in this instrument may leak or explode if it is not used properly. Do not disassemble the battery or throw it into a fire.