新橙彩票

气体检测仪 气体报警器 气体探头 气体传感器 气体传感器模组 无人机大气监测系统 气体报警控制主机 Keywords: gas detector gas alarm gas probe gas sensor gas sensor module drone atmospheric monitoring system gas alarm control host

Your current location : 新橙彩票 > Frequently Asked Questions

Installation precautions for fixed gas detectors

This site2017-04-08 16:39:21

Installation precautions for fixed gas detectors

The gas detector is a gas leak detection alarm device. 而保障安全生产。 When a flammable or toxic gas leaks in an industrial environment, and the gas alarm detects that the gas concentration reaches the critical point set by the explosion or poison alarm, the alarm will issue an alarm signal to remind the work to take safety measures and drive the exhaust and cut off Spray system to prevent accidents such as explosion, fire and poisoning, thereby ensuring safe production. The industrial fixed gas detector consists of an alarm controller and a detector. The controller can be placed in the duty room and mainly controls the monitoring points. The detector is installed in the place where the gas is most likely to leak. Its core component is built-in gas. The sensor detects the concentration of gas in the air.

Installation location:
1. The gas detector should be installed in a place where the gas is easy to leak, and the specific position should be determined according to the specific gravity of the detected gas relative to the air.
2. When the specific gravity of the detected gas is greater than the specific gravity of the air, the detector should be installed at a distance of 30 to 60 cm from the ground with the sensor part facing down.
3. In order to properly use the detector and prevent the malfunction of the detector, please do not install it in the following locations:
4. Places directly affected by steam and oil fume.
online service